Howdy, all!
“That’s an interesting title”, you say. “What does it mean? Is it a countdown to something?”
Allow me to explain…
Many years ago, a friend and I were discussing models. It was in the early 2000’s, right when the Monogram ProModeler 1/48th scale F-86D arrived at hobby shops. At the time, it was a much welcomed release, since nobody to that point had released an accurate, state of the art kit of the Dog Sabre. Of course, it didn’t take long for the online community to bring up several items to note. If memory serves, they were (in no particular order):
-
It was based on an early Block number airframe (Block 5, IIRC) at the National Museum of the U.S. Air Force that had been used for flight testing, therefore had the early tail without the drag chute compartment and an additional rudder trim tab;
-
It had the early instrument panel layout;
-
And, after a bit of math, it was determined that the wing sweep was too steep by 3.2°.
Of course, Revell AG later released the later configuration of the fuselage with the drag chute, but kept the instrument panel and wing from the earlier ProModeler issue of the kit. But for all the carrying on, the issues were minor.
One thing I said then (and still say it now) is that 99.9% of the people who even see the completed model on my display shelf wouldn’t know the difference between an early and late Dog Sabre instrument panel—even if they were die-hard fans of the F-86. I told one of the guys making a lot of noise over it that I was sure that Eduard or Airwaves (remember Airwaves?) would more than likely make a photoetch set with the proper layout that could easily fix that problem. And, lacking that, a reference photo, a bit of Evergreen sheet, a set of punches or drills, and about an hour's work could fix the problem.
As for the wing, Jennings says it in his article—unless you had the Revell Dog Sabre placed next to a Hasegawa or Academy Sabre with a gridded shelf under them and could view them from directly above, it wouldn’t be noticeable. And, for those intrepid types who couldn’t live with the 3.2° error, they could always do the work and fix it.
I added that unless I put them in the case at the shop (I was still in Florida at the time, and several of my models were in the cases at Warrick Custom Hobbies) or took them to a show, most of my models never got seen by anyone else for more than a few hours—and on a display shelf, nobody ever got close enough to inspect the model to make sure it was “nuts-bolts-rivets” accurate anyway. Plus, if you build models so you can do the contest thing, AMPS or IPMS contest judges are instructed not to evaluate accuracy, anyway. So unless you get so hot and bothered over a half-inch long bit of plastic...
That prompted us to do some math to figure out just how much time our models were being looked at by other people.
The logic worked out something like this:
We estimated an average 10-year life span for a completed model. It seemed like a good starting place.
10 years X 365 days/year X 24 hours/day equals 87,600 hours.
Next, we estimated a few more things.
- You build a model, and take it to the club meeting. The average club meeting clocks in at 2 hours.
- You take it to a contest. The average one day contest is about six or eight hours. To be fair, we’ll call it eight.
- You might take it to the local hobby shop (if such a thing still exists in your area) to show it off for an hour.
So, total that up. We’re at 11 hours. Add on an hour or two for when friends come to visit—you *do* have friends, don’t you? Anyway…
Let’s just say 15 hours. Do some cipherin’...naught from naught...carry the two…and we have 0.017%. If we round it, 15 hours is 0.02 percent of 87,600. Other people look at your model for a total of 0.02% of the model’s life span, using 10 years as the average life span. If the model “lives” longer, the percentage gets even lower.
Maybe you take it to a local, “regional”, and “national” show, the latter being a three-day affair. That comes to 30 hours at shows, plus the other time. Let’s just triple the initial estimate from 15 to 45 hours. What the hell, let’s say 50 hours. That computes to a whopping 0.06% of it’s life span.
Want to stretch it to 100 hours? Okay…that works out to 0.11%. Still less than 1%.
You can split hairs all you want, but on average a completed model that goes from workbench to your personal display shelf will only be looked at by other people for a very small sliver of the total lifespan. Otherwise, your peepers are the only ones to view your work.
So again, *who* do you build your models for?
~~~~~ ~~~~~ ~~~~~ ~~~~~ ~~~~~
Work on the A-10A’s continues slowly. The pylon depressions on the 1/48th scale model are filled and ready to have the ResKit pylons (for the Hobby Boss kit, explaining why the depression on the Tamiya wing had to be filled), and some color has been applied to the 1/72nd scale model. I want to try and complete the 1/72nd scale model in the next few weeks.
~~~~~ ~~~~~ ~~~~~ ~~~~~ ~~~~~
In the meantime, I’ve bought some stuff.
I’ve wanted to get a set of quick disconnects for the airbrushes for a few years, and figured I might as well buy a MAC valve, too. I still need to play with the valve and test things out, but the big benefit is being able to switch airbrushes quickly.
I also bought some wax pencils. Back a long time ago, a modeling friend used them to position small parts. I had forgotten about them until a FineScale Modeler video reminded me how handy they were. And they’re dirt cheap—I bought 10 and some sorting trays on Amazon for less than $8 American…
~~~~~ ~~~~~ ~~~~~ ~~~~~ ~~~~~
Along with the tools, of course I bought some kits.
Back in 1996, I used the KMC resin conversion kit to build an FM-2 Wildcat from the Tamiya kit. The model turned out pretty nice, but it always nagged me that the conversion was about as superficial as it could get. All KMC really gave you was a copy of the kit cowl, a casting of an extended kit rudder, and some very sketchy instructions (later versions of the conversion also offered an engine). So imagine my glee when Eduard introduced their FM-2 kit at the IPMS/USA National Convention. I was so happy, I bought two. I’m tempted to push the A-10’s to the side…
At about the same time, my order from Ukraine arrived. Once again, I have to commend Plastic Models Store in Kyiv for their superb service. If you want kits made in Ukraine, give them a whirl.
~~~~~ ~~~~~ ~~~~~ ~~~~~ ~~~~~
I was discussing the A-10 project with someone at work. He wasn’t too versed on the whys and wherefores of the ThunderHog. I gave him a few places to read up on it, and told him if he really wanted some fun, he should look at all the various postwar agreements made between and among the various branches of the U.S. military. As I refreshed my own memory, I thought it might be a good idea to write it all down in capsule form and post it here as a companion to my piece on “The McNamara Effect” that I wrote a few years ago. Stay tuned, sports fans...
That's all I have for this installment. Thanks for reading. Be good to one another, and, as always, I bid you Peace.
Comments
You can follow this conversation by subscribing to the comment feed for this post.